Replacing an existing shower
If the shower is staying in its current position, start with what can stay beneath it. A straight replacement still needs compatible supply connections, a sound base and a waste that drains properly. Changing the valve alone is a different job from opening the walls, removing the tray and rebuilding the wet area. The survey separates those options before you commit to fittings.
Moving from a curtain to a screen also changes how you enter the shower and where splashes land. Check the opening beside the basin, the wall fixing positions and whether the existing tray suits the proposed glass. If the problem is a leak rather than the layout, ask about repair before deciding to replace the whole shower.
Electric shower installation
An electric shower heats its own water; a mixer uses the home's hot and cold supplies. Which one makes sense depends on the water system, not simply which unit fits the space left by the old shower. Bring that choice to the survey before buying a replacement. An electric shower needs a suitable dedicated supply, and bathroom electrical work must comply with Part P and be certified.
The plumbing connections and the position of the controls also need considering alongside the wall finish. Keeping a familiar position can be useful, but an existing mixer does not establish that an electric shower can be installed there without other work.
Shower tray replacement
A crack in a tray and water escaping past a joint are not the same fault. Before specifying a replacement, the source of the leak needs identifying. Where the tray must come out, lifting it exposes the support underneath and gives access to the waste connection. Covering the edge with more sealant cannot put a damaged base right.
Replacement involves preparing that exposed area, checking how the new waste joins the drain and re-sealing the tray against the surrounding finishes. The proposed tray height matters too: lowering it changes the space available for the trap and pipe fall.
Shower installation in Cheltenham
In Cheltenham's Regency and Victorian conversions, an upstairs shower may sit in a room that was not originally a bathroom. The proposed tray has to work with the timber floor beneath it and the route back to the existing drainage. A low tray chosen from a catalogue is not enough to establish whether there is room for that route. We look at the room before setting out the work in a fixed written quote.
For a flat within a converted building, explain the access through the shared entrance and stairs at the survey. It is also worth identifying where the pipework leaves the room before choosing a concealed valve or a different shower position. Keep the proposed screen opening clear of the door and basin. If the shower is part of a full room change, the Cheltenham bathroom fitting page covers that wider project; the town page gives the local context.
