Start with the right bath
Not every bath is a good shower base. A shower bath has a wider end where you stand, giving more room to move and a better seal for a curved screen. Standard straight baths work too, but the standing area should be flat and the bath firm underfoot. Thin acrylic baths without proper support flex when you stand in them, which cracks sealant and lets water behind the panel.
A properly fitted bath sits on adjusted feet with a supporting cradle or board, and is fixed to the wall. That is especially important when it doubles as a shower tray. Our bath installation service covers fitting a bath suitable for showering.
Choosing a bath screen
The screen decides how dry the floor stays. Single fixed panels are simple but need a long enough return to contain spray. Hinged or folding screens swing out of the way for bathing and cleaning. Curved screens match a shower bath and give more elbow room. Screens with a small fixed return panel are useful where spray escapes at the tap end.
Bath screen installation depends on a solid wall to fix into, a level bath edge and careful sealing where the profile meets the wall and bath. The screen should sit inside the bath rim so water runs back into the tub rather than onto the edge.
Mixer or electric shower
A mixer shower blends hot and cold water already in the house. It suits homes with good hot water flow, such as a combination boiler or a pressurised cylinder, and can be exposed on the wall or concealed behind it. A bath shower mixer tap with a handset is the simplest version, though it is better for rinsing than a full shower.
An electric shower heats cold mains water as it flows, so it works independently of the hot water supply. It needs a dedicated electrical circuit, and flow is usually gentler than a good mixer. The right choice depends on your water system rather than on preference alone.
Walls and splash zones
The walls around a shower over bath get soaked daily, so they need a properly prepared, water-resistant background before tiles or panels go on. Plain plasterboard behind tiles in this zone is a common source of failure. Tiling or panelling should cover the full height of the shower area and extend past the end of the screen.
Shower wall panels are an alternative to tiles with fewer joints to maintain. Whichever finish you choose, the joint between bath and wall is sealed with flexible sealant, ideally with the bath filled with water so it settles under load first.
Practical details people forget
Position the shower controls where they can be reached from outside the bath, so the water can be run warm before you step in. Think about a recessed shelf or a fixed rack rather than bottles balanced on the bath edge. A non-slip mat or a bath with a textured standing area helps with safety, particularly for children and older family members.
Ventilation matters more with a daily shower. An extractor fan sized for the room helps sealant, grout and paint last much longer.
Is a shower over bath right for you?
A shower over bath suits households that want a bath for children or relaxing and a shower for weekday mornings in one space. If nobody uses the bath, a dedicated shower may be more comfortable and easier to step into, and our bath to shower swap guide covers that option.
For a new shower over an existing bath, or a full refit with a shower bath and screen, see our shower installation service for how we survey and quote.