Bathroom and kitchen plumbing
A tap that drips all day wastes water, marks the basin and usually gets worse rather than better. Most leaks come from a worn washer, cartridge or O-ring, and many can be put right without replacing the whole tap. When the body is corroded, parts are no longer made or you simply want a different style, a replacement is the better use of a visit. We look at the tap, explain whether repair or replacement makes more sense and provide a fixed written quote before any work starts.
Monday to Friday, 8am to 6pm. Quotes are free and without obligation, and we aim to reply within 24 hours.
A drip from the spout with the tap turned off points to the part that closes the waterway: a rubber washer on older pillar taps, or a ceramic cartridge on quarter-turn and lever taps. Water appearing around the handle or the base of the spout usually means a tired O-ring or gland seal instead. Each fault needs a different part, so it helps to note exactly where the water shows.
Water under the basin or sink is a separate problem. It can come from the flexible tap connectors, the isolation valves or the waste rather than the tap itself. A waste leak only appears while water is draining, whereas a supply leak carries on with the taps closed. Our common plumbing repairs page covers the checks you can make first.
Repair is usually worthwhile when the tap is sound and the right washer or cartridge can still be found. Many modern mixers use cartridges specific to the brand, and an unbranded tap can be hard to match. Limescale is the other deciding factor: a tap body heavily scaled inside may keep wearing out new parts quickly.
Replacement makes sense when the chrome is pitted, the tap wobbles on a cracked mounting or you are changing the look of the room. Basin tap replacement and kitchen tap replacement follow a similar pattern, although kitchen mixers often have longer tails and a taller spout that has to clear the window and cupboards.
Swapping two pillar taps for a single mixer means checking the number of holes in the basin or sink, the hot and cold supply pressures and whether the new tap suits them. Some mixers are made for low-pressure systems fed from a tank in the loft, while others need mains pressure to flow properly. Choosing the wrong one is a common reason a new tap disappoints.
Where the basin or sink has the wrong number of holes for the tap you want, the fitting itself may need to change. That can be a straightforward swap or part of a wider job such as basin and vanity unit installation.
An outside tap needs a sensible route through the wall from a nearby supply, usually the kitchen, plus an isolation valve inside so it can be turned off and drained before winter. A double check valve stops garden water being drawn back into the drinking supply, and it is a requirement for an outside tap. Pipework running along an external wall should be insulated.
Outside tap replacement is usually simpler, as the supply is already there. It is still worth checking the inside valve and the pipe through the wall, because an old outside tap that has frozen can split the pipe behind it.
The main variables are the type of tap, whether you supply it or we do, and the condition of what sits underneath. Seized isolation valves, short or corroded supply pipes and awkward access behind a sink or a boxed-in basin all add time. A repair that turns out to need a cartridge nobody stocks can also become a replacement.
Photographs of the tap, the brand name if it is visible and the pipework under the basin or sink help us price the job accurately. If there are several small plumbing jobs to do, our plumbing services page explains how they can be grouped into one weekday visit.
We work across our Gloucestershire and Herefordshire area, Monday to Friday, 8am to 6pm. Include your postcode and a few photographs when you enquire so we can see the job before we visit.
Related: Plumbing services, Common plumbing repairs, Stopcock replacement.
Often it can. A new washer, cartridge or seal cures most drips, provided the correct part is still available for that tap.
A straightforward like-for-like swap is usually a short job. Seized valves, corroded pipes or a change to the tap or basin type take longer.
If your hot water comes from a tank in the loft, choose a tap rated for low pressure. Some mixers need mains pressure to flow well.
Yes. A double check valve stops water from a hose being drawn back into the drinking water supply.
Calls answered 8am-6pm Mon-Fri · missed calls returned the same day.
"A master of his class, gone above & beyond to deliver exactly what I wanted, to an extremely high spec.", Jamie, verified review