Electric shower fitting

Electric shower installation

An electric shower heats incoming cold mains water rather than drawing on the home's stored or boiler-heated hot water. Installing one therefore requires attention to both the water supply and the electrical work involved. The starting point should be an assessment of the proposed shower position, incoming flow and existing installation, not an assumption that any new unit will suit the connections already available.

Monday to Friday, 8am to 6pm. Quotes are free and without obligation, and we aim to reply within 24 hours.

Establish what the shower needs to do

Explain whether the project is a replacement, a new shower position or part of a wider bathroom alteration. Those are different installation briefs. A replacement still needs assessment, while a new location also raises questions about supply routes, wall finishes and the surrounding shower arrangement.

The reason for choosing electric matters as well. Heating cold water at the shower makes its hot water provision independent of the household's hot water supply. That characteristic may suit the room's intended use, but it does not remove the need to check the incoming water conditions or establish suitable electrical involvement.

Check flow before choosing the unit

The incoming flow should be checked at survey rather than inferred from another tap or from the appearance of the existing shower. Product selection needs to respond to the actual supply. A preferred model can form part of the discussion, but its suitability should be established before ordering.

Electric shower performance also relates to the temperature of the incoming water. Colder mains water requires more heating to reach the selected shower temperature, which can affect the available flow. Understanding that relationship helps set sensible expectations without presenting the installation as a promise of a particular spray strength throughout the year.

Treat electrical suitability as part of the assessment

Bathrooms have electrical safety zones because equipment is positioned close to water. Those zones affect where fittings can be installed and the level of water protection they require. The electrical assessment should therefore inform the proposed shower position rather than follow a layout that has already been treated as final.

A plumber can undertake bathroom electrical work only if also qualified and registered to carry it out; otherwise a qualified electrician needs to be involved. Confirm the responsibilities before work starts. The presence of an existing electric shower should not replace a discussion about the electrical work required for the proposed installation.

Clarify certification without blanket statements

New circuits and consumer unit work generally need to be certified and, where applicable, notified as part of building regulations. The requirements should be established for the actual scope rather than assuming that every shower replacement involves identical paperwork.

You should receive documentation for any certifiable electrical work, and it is worth confirming that this is included before the job begins. Keep the electrical certificate with the property paperwork, as it may be requested when the property is sold. Our electrical work and certification guide explains more, and the survey establishes how these points apply to your installation.

Include the wall and shower enclosure in the scope

Replacing a shower can affect more than the appliance itself. The assessment should consider the wall finish around it, any penetrations through that finish and the relationship with the screen or enclosure. If the new arrangement exposes an unfinished area, making good needs to be identified rather than left outside the discussion.

For Cotswold Maintenance Group, the process is a survey followed by a fixed written quote. The proposed scope should distinguish the shower fitting, plumbing alterations, electrical involvement and surrounding repairs included. Photographs and the details of any preferred unit are useful starting information. Access, water isolation and normal weekday working arrangements should also be agreed.

Where we cover

We cover Gloucester, Cheltenham, Tewkesbury, Stroud, Stonehouse, Malvern, Ledbury, Newent and Ross-on-Wye. Include your location and photographs of the room when enquiring.

Related: Electrical work and certification, Shower installation, Shower repair.

Honest answers

Does an electric shower use the boiler's hot water?

An electric shower heats its incoming cold mains supply at the unit. Its hot water provision is therefore separate from a shower that mixes household hot and cold supplies.

Can I choose the replacement before the survey?

You can identify a preference, but the water supply, electrical requirements and fitting position need assessment before suitability is confirmed. An existing unit is not enough information to approve another model.

What electrical paperwork should be discussed?

Confirm whether the proposed work is certifiable and what documentation is included. New circuits and consumer unit work generally require certification and, where applicable, notification. Retain any electrical certificate with the property's records.

See your fixed price in 24 hours

Calls answered 8am-6pm Mon-Fri · missed calls returned the same day.

"A master of his class, gone above & beyond to deliver exactly what I wanted, to an extremely high spec.", Jamie, verified review

We cover Gloucester, Cheltenham, Tewkesbury, Stroud, Stonehouse, Malvern, Ledbury, Newent and Ross-on-Wye, plus the surrounding villages.

No spam · Reply within 2 hours on working days · Free, no-obligation quote

Local & Reliable
Free Quotes
Quality Workmanship
Bathroom & Plumbing Specialists