1920s–present property · Gloucestershire

Bathroom installation for bungalow homes in Andoversford

A full installation done properly for a bungalow — strip-out, plumbing, electrics, tiling and finishing handled as one project. Bungalow bathrooms are well-suited to wet-rooms and accessible refits — single-floor living means no joist concerns from above and all drainage is at ground level. The challenge is usually older fittings, smaller rooms, and an owner profile thinking about long-term accessibility.

What a full installation covers in a bungalow

A complete bathroom installation in a bungalow typically runs through these stages:

1

Strip-out & survey

Old suite, tiles and substrate removed. Joists, pipework and walls inspected — important in 1920s–present properties where what's behind the tiles isn't always what you'd expect.

2

First-fix plumbing & electrics

Hot/cold supply re-routed where needed, soil and waste set, new electrical circuits run and certified under Part P. Underfloor heating laid if specified.

3

Substrate, plastering & boards

Tile-backer board on wet walls, plaster on dry. Floor levelled and reinforced where the joists need it — common in older properties.

4

Tiling, fitting & finishing

Wall and floor tiling, suite fitted, second-fix electrics, sealants, decoration and snag-list — everything ready to use the day we hand back.

What we plan around in a bungalow

Specific quirks of bungalow properties in Andoversford.

  • Solid concrete floors common — drainage modifications need core-drilling
  • Loft-mounted cold water tanks if not on a combi — often need swapping for combi during the refit
  • Single-storey eaves limit ceiling height around the perimeter
  • Easy external soil stack access — most bathrooms back to an external wall

What we typically uncover

Once the old bathroom is out, these are the issues we most often find in bungalow homes around Andoversford — and we cost them in honestly before re-fitting.

Outdated avocado/salmon suites still surprisingly common

Inaccessible WC heights for older homeowners

Slippery vinyl floors past their lifespan

Single thermostatic shower over the bath with no enclosure

Regs and consents to watch

For a bungalow installations specifically — most relevant to Gloucestershire properties.

  • Document M accessibility considerations if the household has accessibility needs
  • Loft tank removal may require flue/vent modifications
  • Solid floor drainage changes are notifiable to Building Control

Typical layout

Around 2.3×2.0m bathroom on the bungalow's external wall, often back-to-back with the kitchen for shared service runs.

Realistic installation cost

~£7,650

Typical installed price in Andoversford (£4,400£13,700 range)

Bungalow refits run close to the regional average for standard refits, and slightly above for accessibility conversions due to grab rails, level-access trays, and wider doorways.

See full installation cost breakdown for Andoversford

Why it matters in Andoversford

Andoversford has a strong mix of stone cottages on the old Gloucester road, mid-century bungalows, and modern family homes on the recent edge developments.

Newer Andoversford developments often have boxed-in plastic soil pipes that limit layout changes — we plan around them rather than ripping out.

A growing Cotswold village east of Cheltenham, Andoversford's expanding housing means rising demand for both new-build snagging and refurbishment of older properties.

Installation tips for bungalow bathrooms

  • 1If the owner is over 60, design with future accessibility in mind even if not needed today — fold-down seat blocking, level access, raised WC pan
  • 2Convert to a wet room or level-access shower while the floor is up — it's the perfect property type
  • 3Replace the loft cold tank with a combi or unvented system — frees up loft space and improves pressure

Andoversford bungalow installation questions

How long does a full bathroom installation take in a bungalow?

Most bungalow installations run 8–12 working days from strip-out to silicone. Older substrates and traditional fittings can add a couple of days — we'll set the schedule before we start so you know what to expect in your Andoversford home.

What does a bathroom installation in a bungalow actually cost in Andoversford?

Expect roughly £4,400 at the lower end, £7,650 for a typical mid-range refit, and £13,700+ for a high-spec installation. Bungalow refits run close to the regional average for standard refits, and slightly above for accessibility conversions due to grab rails, level-access trays, and wider doorways. Andoversford jobs tend to come in fractionally below the regional average when scheduled alongside other work in the same postcode.

Do you handle every trade — plumbing, electrics, tiling, plastering?

Yes. We project-manage the full installation in-house: strip-out, first-fix plumbing and electrics, plastering and substrate prep, tiling, second-fix and finishing. You deal with one team and one quote, not five trades.

Do you cover the building regs and Part P for a bungalow installation?

All bathroom electrics are notified under Part P. We'll also brief you on anything specific to a bungalow in Andoversford — soil-stack alterations, listed-building consent, or conservation-area constraints if they apply.

Will I be without a bathroom during the installation?

For most bungalow homes, the bathroom is fully out of action for 5–7 days mid-project. Where there's a second WC or basin we keep that running; otherwise we agree a plan up front.

Quote for your bungalow installation in Andoversford

Free site survey. Itemised written quote. We'll flag any bungalow-specific issues before we ever quote a final number.

Get a Quick, Personalised Quote

Tell us about your project and we'll get back to you within 24 hours.

We primarily cover GL, WR and HR postcodes — within ~45 minutes of Gloucester.

Local & Reliable
Free Quotes
Quality Workmanship
Bathroom & Plumbing Specialists
Portfolio · Gloucestershire

Recent work nearby

Examples of recent work delivered close to Andoversford. We choose projects from the nearest postcode area first so you can see what's been built locally.

fully tiled bathroom refit — Stroud project, similar to what we deliver in Andoversford
Stroud, Gloucestershirefully tiled bathroom refit
Bathroom Installation in Cirencester — example of work near Andoversford
Cirencester, GloucestershireCotswold stone-inspired bathroom
en-suite bathroom installation project, Quedgeley (Gloucestershire)
Quedgeley, Gloucestershireen-suite bathroom installation

Booking bathroom installation work in Andoversford?

Our diary fills 3–4 weeks ahead in peak season. Get on the list now and we'll confirm a site-visit window inside one working day.

In short

Final thought: a bathroom installation is a 1–3 week project that lives with you for a decade. Choose the team that takes the visit seriously, asks the awkward questions, and writes the price down. We do all three across GL50.

Andoversford, Gloucestershire

Local coverage details

Bathroom Installation jobs in Andoversford are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.

Council & postcodes

Cheltenham Borough Council — covering GL50, GL51, GL52, GL53 postcode districts.

Nearest major roads

We reach Andoversford via M5 J10, M5 J11, A40 — and serve sites within roughly 18 miles of here.

Nearby towns we also cover
Commercial areas nearby

Kingsditch Trading Estate · Lansdown Industrial Estate · Cheltenham Trade Park

Access & logistics

Andoversford is a Cheltenham neighbourhood — cheltenham's regency terraces have narrow service lanes — we use trade parking on bath road or tivoli for jobs in the montpellier area.