1920s–present property · Gloucestershire

Bathroom installation for bungalow homes in Cirencester

A full installation done properly for a bungalow — strip-out, plumbing, electrics, tiling and finishing handled as one project. Bungalow bathrooms are well-suited to wet-rooms and accessible refits — single-floor living means no joist concerns from above and all drainage is at ground level. The challenge is usually older fittings, smaller rooms, and an owner profile thinking about long-term accessibility.

Get an installation quote About our installation service 07927 593 585

What a full installation covers in a bungalow

A complete bathroom installation in a bungalow typically runs through these stages:

1

Strip-out & survey

Old suite, tiles and substrate removed. Joists, pipework and walls inspected — important in 1920s–present properties where what's behind the tiles isn't always what you'd expect.

2

First-fix plumbing & electrics

Hot/cold supply re-routed where needed, soil and waste set, new electrical circuits run and certified under Part P. Underfloor heating laid if specified.

3

Substrate, plastering & boards

Tile-backer board on wet walls, plaster on dry. Floor levelled and reinforced where the joists need it — common in older properties.

4

Tiling, fitting & finishing

Wall and floor tiling, suite fitted, second-fix electrics, sealants, decoration and snag-list — everything ready to use the day we hand back.

What we plan around in a bungalow

Specific quirks of bungalow properties in Cirencester.

  • Solid concrete floors common — drainage modifications need core-drilling
  • Loft-mounted cold water tanks if not on a combi — often need swapping for combi during the refit
  • Single-storey eaves limit ceiling height around the perimeter
  • Easy external soil stack access — most bathrooms back to an external wall

What we typically uncover

Once the old bathroom is out, these are the issues we most often find in bungalow homes around Cirencester — and we cost them in honestly before re-fitting.

Outdated avocado/salmon suites still surprisingly common

Inaccessible WC heights for older homeowners

Slippery vinyl floors past their lifespan

Single thermostatic shower over the bath with no enclosure

Regs and consents to watch

For a bungalow installations specifically — most relevant to Gloucestershire properties.

  • Document M accessibility considerations if the household has accessibility needs
  • Loft tank removal may require flue/vent modifications
  • Solid floor drainage changes are notifiable to Building Control

Typical layout

Around 2.3×2.0m bathroom on the bungalow's external wall, often back-to-back with the kitchen for shared service runs.

Realistic installation cost

~£7,800

Typical installed price in Cirencester (£4,500–£14,000 range)

Bungalow refits run close to the regional average for standard refits, and slightly above for accessibility conversions due to grab rails, level-access trays, and wider doorways.

See full installation cost breakdown for Cirencester →

Why it matters in Cirencester

Cirencester features honey-coloured Cotswold stone throughout, from medieval cottages in the town centre to substantial Georgian townhouses on Park Street.

Listed building restrictions in Cirencester's conservation area can limit external alterations, affecting bathroom ventilation and flue options.

Known as the Capital of the Cotswolds, Cirencester's stone-built homes and period properties demand high-quality bathroom installations that complement their traditional character.

Installation tips for bungalow bathrooms

  • 1If the owner is over 60, design with future accessibility in mind even if not needed today — fold-down seat blocking, level access, raised WC pan
  • 2Convert to a wet room or level-access shower while the floor is up — it's the perfect property type
  • 3Replace the loft cold tank with a combi or unvented system — frees up loft space and improves pressure

Cirencester bungalow installation questions

How long does a full bathroom installation take in a bungalow?

Most bungalow installations run 8–12 working days from strip-out to silicone. Older substrates and traditional fittings can add a couple of days — we'll set the schedule before we start so you know what to expect in your Cirencester home.

What does a bathroom installation in a bungalow actually cost in Cirencester?

Expect roughly £4,500 at the lower end, £7,800 for a typical mid-range refit, and £14,000+ for a high-spec installation. Bungalow refits run close to the regional average for standard refits, and slightly above for accessibility conversions due to grab rails, level-access trays, and wider doorways. Cirencester prices in line with the wider Gloucestershire market.

Do you handle every trade — plumbing, electrics, tiling, plastering?

Yes. We project-manage the full installation in-house: strip-out, first-fix plumbing and electrics, plastering and substrate prep, tiling, second-fix and finishing. You deal with one team and one quote, not five trades.

Do you cover the building regs and Part P for a bungalow installation?

All bathroom electrics are notified under Part P. We'll also brief you on anything specific to a bungalow in Cirencester — soil-stack alterations, listed-building consent, or conservation-area constraints if they apply.

Will I be without a bathroom during the installation?

For most bungalow homes, the bathroom is fully out of action for 5–7 days mid-project. Where there's a second WC or basin we keep that running; otherwise we agree a plan up front.

Other property types in Cirencester

Bungalow installations nearby

Quote for your bungalow installation in Cirencester

Free site survey. Itemised written quote. We'll flag any bungalow-specific issues before we ever quote a final number.

Get a Quick, Personalised Quote

Tell us about your project and we'll get back to you within 24 hours.

We primarily cover GL, WR and HR postcodes — within ~45 minutes of Gloucester.

Local & Reliable
Free Quotes
Quality Workmanship
Bathroom & Plumbing Specialists
Portfolio · Gloucestershire

Relevant projects from this area

Nothing AI-rendered, nothing stock — these are jobs we've delivered in and around Gloucestershire.

walk-in shower and vanity unit — Cheltenham project, similar to what we deliver in Cirencester
Cheltenham, Gloucestershire — walk-in shower and vanity unit
Bathroom Installation in Tewkesbury — example of work near Cirencester
Tewkesbury, Gloucestershire — full bathroom refit with freestanding bath
plumbing bathroom installation project, Gloucester (Gloucestershire)
Gloucester, Gloucestershire — first-fix plumbing installation

Booking bathroom installation work in Cirencester?

Our diary fills 3–4 weeks ahead in peak season. Get on the list now and we'll confirm a site-visit window inside one working day.

Get on the diary 07927 593585

In short

Most Cirencester clients come to us after a quote elsewhere that felt thin on detail. Ours isn't — every line item is listed, every assumption is named, and we'd rather lose the job than over-promise.

Cirencester, Gloucestershire

Where we work

Bathroom Installation jobs in Cirencester are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.

Council & postcodes

Cotswold District Council — covering GL7 postcode district.

Nearest major roads

We reach Cirencester via A417, A419, A429 — and serve sites within roughly 20 miles of here.

Nearby towns we also cover
Commercial areas nearby

Love Lane Industrial Estate · Cirencester Business Park

Access & logistics

Cirencester town centre is conservation-area controlled — we coordinate skip and material drops with the council where required.