Fully tanked wet room installation — the entire floor is waterproofed and drained, creating a seamless, open shower space. Serving Winterbourne and surrounding areas.
A true wet room in Winterbourne means the entire floor (and sometimes walls) are fully tanked with waterproof membrane. Skip this step and you'll have water damage within 2 years.
Without the containment of a shower enclosure, moisture spreads further in a wet room. Winterbourne bathrooms need adequate extraction — typically a 100mm fan on a humidity sensor, vented externally.
Don't let these problems get worse. Get your free quote today.
✓
Free Quotes
✓
Fully Insured
✓
Clean & Tidy
✓
Workmanship Guarantee
Temperature comfort in a Winterbourne wet room depends on heating the entire floor, not just the area around the drain. We install underfloor heating across the full floor area, including under the shower zone, so the room dries quickly after use and feels warm underfoot at any time of day. This combination of wet room and UFH is our standard recommendation.
A wet room in Winterbourne is the ultimate in shower luxury — but it's a specialist installation, not a standard tiling job. The entire floor needs tanking with waterproof membrane, a precise gradient to the drain, and anti-slip tiling. We've fitted wet rooms on timber floors, concrete floors, and in loft conversions across the area.
A historic village in South Gloucestershire, Winterbourne's diverse housing stock from stone cottages to modern estates creates demand for quality bathroom work.
Winterbourne features a mix of Victorian cottages in the old village, inter-war housing, and modern estates towards the bypass.
Winterbourne's older properties near the high street can have compromised drainage systems from decades of incremental modification.
most housing stock has standard cavity walls and timber floors, making bathroom fitting straightforward compared to older stone properties. Stud walls in newer homes need reinforcing for wall-hung fixtures. new-build homes in Yate, Thornbury, and surrounding developments often come with builder-grade bathrooms that homeowners want to upgrade within the first few years — we see a lot of this work. That's why choosing an experienced, local wet room specialist in Winterbourne matters.
Drainage design in South Gloucestershire wet rooms must handle the full shower output while allowing for safe walking. Linear drains along one wall are popular in Winterbourne installations because they simplify the floor gradient (one-way fall instead of four-way) and create a clean architectural line.
Heating a wet room in Winterbourne is more important than in a standard bathroom because the entire floor gets wet. Underfloor heating dries the floor faster, prevents the cold, damp feeling that wet rooms can have, and reduces the risk of mould. We include UFH as a standard recommendation in all our wet room installations.
Regular squeegee use after showering extends the life of your South Gloucestershire wet room and prevents soap scum buildup on tiles. We provide a stainless steel squeegee with every Winterbourne wet room installation — it takes 30 seconds and makes a real difference.
Wet room doors should open outward or be sliding — an inward-opening door can be blocked by water pooling behind it, and the constant water contact deteriorates the door bottom faster.
Anti-slip tiles in South Gloucestershire wet rooms should be tested to at least R10 rating. In Winterbourne, we recommend R11 for elderly residents or families with young children — it provides noticeably more grip on a fully wet floor.
Wet Room jobs in Winterbourne are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.
South Gloucestershire Council — covering BS, GL postcode districts.
We reach Winterbourne via M4, M5, M48 — and serve sites within roughly 25 miles of here.
Aztec West · Severnside
South Gloucestershire is reached via the M5 J14, typically 35 minutes from our base.
Examples of recent work delivered close to Winterbourne. We choose projects from the nearest postcode area first so you can see what's been built locally.



Booking wet room in Winterbourne shouldn't feel stressful. We've designed our process to give South Gloucestershire homeowners confidence at every stage. You'll receive a written quote, a clear timeline, daily progress updates, and a formal handover inspection at the end. No surprises, no hidden costs, no ambiguity about what's included.
After completing your wet room in Winterbourne, we don't just disappear. We walk through the finished work with you, explain any maintenance requirements, provide warranty documentation, and make sure you have our direct number. If anything needs attention in the weeks after completion, we respond promptly.
Using standard plasterboard in wet zones. In South Gloucestershire shower installations, moisture-resistant board (green or blue board) or tile backer board must be used. Standard plasterboard in a Winterbourne shower area will sag and fail.
Skipping the waterproofing step entirely. We've seen Winterbourne showers where tiles were stuck directly to plasterboard with no membrane — the board was rotten within two years.
Choosing a rainfall shower head without checking water pressure. In many Winterbourne homes, the flow rate simply can't support a large-diameter head — the result is a disappointing trickle instead of a downpour.
We approach every wet room project in Winterbourne as if it were our own home — because our reputation depends on every single job we complete. Before any work begins in Winterbourne, we create a clear project plan with daily milestones so you know exactly what's happening and when during your wet room project. Attention to finishing details is what separates professional wet room in Winterbourne from amateur work — clean silicone lines, aligned tile grout, precise fixture positioning, and thorough testing of every connection. Our wet room clients in Winterbourne frequently recommend us to friends and family — which is the highest compliment any tradesperson can receive and one we never take for granted.
Having worked on hundreds of South Gloucestershire properties, our approach to wet room in Winterbourne is informed by real-world experience with local building styles. We carry a comprehensive stock of parts and materials on our vehicles, which means most wet room work in Winterbourne can proceed without delays waiting for specialist supplies. Our commitment to quality wet room in South Gloucestershire extends to the products we recommend. We won't specify something for your Winterbourne project that we wouldn't be happy installing in our own home. Whether your wet room project in Winterbourne is straightforward or complex, the standard of work we deliver across South Gloucestershire remains exactly the same — meticulous, professional, and built to last.
We source materials from local South Gloucestershire suppliers for wet room in Winterbourne wherever possible. This supports the local economy, ensures faster delivery times, and means we can inspect materials before they arrive at your property. If a tile batch doesn't match, we catch it at the supplier, not on your wall.
Shower screen costs in Winterbourne vary by type: a fixed panel of frameless glass is mid-range, a hinged door in a frame is slightly more, and a bespoke frameless enclosure is at the premium end. We supply all types and advise on the best option for your space and budget.
Check floor structure, joist direction, and capacity for wet room conversion.
Install a precisely sloped former and linear or point drain in the floor.
Apply liquid or sheet membrane waterproofing to the entire floor and wet area walls.
Anti-slip floor tiles, wall tiles, glass screen, and shower fixtures installed.
To discuss your wet room project in Winterbourne, call us on 07927 593585 or request a free quote.
Yes, but the floor needs reinforcing and a proper gradient former. We do this regularly in Winterbourne period properties. The key is getting the substrate right before any tiling.
No — the floor slopes gently towards the drain so water drains away within minutes. We also position a glass panel to contain most splash. The rest of the floor stays dry in normal use.
Typically £1,500-£2,500 more than a standard shower installation in Winterbourne, mainly due to the tanking and gradient work. But you save on the cost of a shower tray and enclosure.
Tell us about your project and we'll get back to you within 24 hours.
We also offer these services in Winterbourne and surrounding areas.
We also provide wet room in these nearby areas:
Hand-written background reading and pricing for this exact combination — not auto-generated filler.
Contact Cotswold Maintenance Group today for a free, no-obligation quote. We'll get back to you within 24 hours.
We quote in writing, line by line. You'll see exactly what's included for Winterbourne (BS, GL) before you commit to anything.
Final thought: a wet room is a 1–3 week project that lives with you for a decade. Choose the team that takes the visit seriously, asks the awkward questions, and writes the price down. We do all three across BS.