Fully tanked wet room installation — the entire floor is waterproofed and drained, creating a seamless, open shower space. Serving Sheepscombe and surrounding areas.
Without the containment of a shower enclosure, moisture spreads further in a wet room. Sheepscombe bathrooms need adequate extraction — typically a 100mm fan on a humidity sensor, vented externally.
Wet rooms need a sloped floor to the drain. In Sheepscombe timber-floor properties, this means installing a gradient former on top of the joists — it's specialist work, not a general tiling job.
Don't let these problems get worse. Get your free quote today.
✓
Free Quotes
✓
Fully Insured
✓
Clean & Tidy
✓
Workmanship Guarantee
Wet rooms in Sheepscombe are increasingly specified as the primary bathroom, not just a luxury addition. Families appreciate the easy cleaning, elderly residents value the level access, and everyone enjoys the open, spacious feeling. We design wet rooms that serve as the main household bathroom — practical and beautiful enough for daily use by everyone.
The drainage system in a Gloucestershire wet room needs to handle peak shower flow without any standing water. In Sheepscombe installations, we use high-capacity linear drains rated at 40+ litres per minute, set flush with the finished tile surface. The drain position determines the floor gradient direction — we plan this first, before any other design decisions.
A hidden valley village near Painswick, Sheepscombe's steep terrain and traditional cottages present interesting bathroom installation challenges.
Sheepscombe's homes are built into a steep valley, with many cottages accessed via narrow lanes and steps.
The steep gradient in Sheepscombe means some properties need pumped drainage systems to move waste water uphill to the main sewer.
the Severn Vale gets damp winters with heavy rainfall. Bathrooms need good ventilation and proper waterproofing — condensation on cold stone walls is a particular issue in older properties. water is moderately hard in most of Gloucestershire (150-250 mg/l calcium carbonate). Limescale builds up on shower heads, taps, and heating elements — thermostatic valves and easy-clean coated shower glass help manage this.
Wet room construction in Gloucestershire timber-framed properties requires specific floor treatment. In Sheepscombe homes with joisted floors, we install marine-grade plywood over the joists, then pre-formed gradient boards to create the drainage fall. This structural approach prevents the flexing that cracks membrane joints and causes leaks.
The entire floor and lower walls of a Sheepscombe wet room receive tanking membrane — typically a two-coat liquid system with reinforcement tape at all junctions. We apply this to manufacturer specifications and document the process, because if there's ever a warranty issue, proper application records matter.
Anti-slip tiles in Gloucestershire wet rooms should be tested to at least R10 rating. In Sheepscombe, we recommend R11 for elderly residents or families with young children — it provides noticeably more grip on a fully wet floor.
If your Sheepscombe wet room is above another room, insist on a secondary membrane beneath the structural floor as well as the primary tanking on top. Belt-and-braces waterproofing is the only sensible approach when there's a living space below.
Regular squeegee use after showering extends the life of your Gloucestershire wet room and prevents soap scum buildup on tiles. We provide a stainless steel squeegee with every Sheepscombe wet room installation — it takes 30 seconds and makes a real difference.
Wet Room jobs in Sheepscombe are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.
Stroud District Council — covering GL5, GL6, GL10 postcode districts.
We reach Sheepscombe via A46, A419, M5 J13 — and serve sites within roughly 15 miles of here.
Stonehouse Industrial Estate · Bath Road Trading Estate
Sheepscombe is a Stroud neighbourhood — stroud's five valleys means steep, narrow lanes — for hillside properties we sometimes need to barrow materials from the nearest turning point.
A small sample of Gloucestershire work. Every job here was managed by the same team that would handle your Sheepscombe project.



Starting a wet room project in Sheepscombe begins with a conversation. We want to understand your priorities — whether that's staying within a specific budget, achieving a particular look, improving accessibility, or simply replacing something that's failing. From there, we visit your Gloucestershire property, assess the practicalities, and produce a detailed, itemised quote.
During the wet room work in Sheepscombe, you can expect our team on-site from approximately 8:30am to 4:30pm. We clean up each day, remove waste regularly, and keep noise to sociable hours. If we need to turn off your water, we'll warn you in advance and keep the interruption as short as possible.
Not considering door swing and access. In compact Gloucestershire bathrooms, a shower enclosure door that clashes with the bathroom door or toilet is more common than you'd think in Sheepscombe installations.
Using silicone where grout should be, or grout where silicone should be. In Gloucestershire bathrooms, movement joints (where walls meet floors, or where different materials meet) need flexible silicone, not rigid grout.
Using standard plasterboard in wet zones. In Gloucestershire shower installations, moisture-resistant board (green or blue board) or tile backer board must be used. Standard plasterboard in a Sheepscombe shower area will sag and fail.
Sheepscombe residents trust us for wet room because we deliver consistently high standards on every project, regardless of size. In Sheepscombe, we've learned that thorough preparation accounts for 40% of a successful wet room project — it's the work you don't see that determines how long the result lasts. We test every connection, seal, and fitting before completing any wet room in Sheepscombe — water pressure testing, leak checks, and drainage flow tests are non-negotiable parts of our process. Sheepscombe homeowners looking for reliable wet room can call us for a no-pressure conversation about their project — we're happy to advise even if you're not ready to commit.
Sheepscombe homeowners choose us for wet room because we combine technical expertise with genuine local knowledge of Gloucestershire properties. We coordinate all trades internally for wet room across Gloucestershire, so Sheepscombe homeowners deal with one point of contact instead of managing multiple contractors. We photograph key stages of every Gloucestershire installation — waterproofing, pipe routes, electrical connections — so Sheepscombe homeowners have a permanent record of what's behind their walls should future work be needed. We take on a limited number of wet room projects at any time across Gloucestershire, ensuring every Sheepscombe client gets our full attention rather than being one of dozens of simultaneous jobs.
We understand the planning context in Gloucestershire that affects wet room in Sheepscombe. Conservation areas, listed building restrictions, building control requirements — these vary locally and affect what's permissible. Our experience navigating these regulations saves Sheepscombe homeowners time and prevents costly mistakes.
Check floor structure, joist direction, and capacity for wet room conversion.
Install a precisely sloped former and linear or point drain in the floor.
Apply liquid or sheet membrane waterproofing to the entire floor and wet area walls.
Anti-slip floor tiles, wall tiles, glass screen, and shower fixtures installed.
To discuss your wet room project in Sheepscombe, call us on 07927 593585 or request a free quote.
Yes, but the floor needs reinforcing and a proper gradient former. We do this regularly in Sheepscombe period properties. The key is getting the substrate right before any tiling.
No — the floor slopes gently towards the drain so water drains away within minutes. We also position a glass panel to contain most splash. The rest of the floor stays dry in normal use.
Typically £1,500-£2,500 more than a standard shower installation in Sheepscombe, mainly due to the tanking and gradient work. But you save on the cost of a shower tray and enclosure.
Tell us about your project and we'll get back to you within 24 hours.
We also offer these services in Sheepscombe and surrounding areas.
We also provide wet room in these nearby areas:
Hand-written background reading and pricing for this exact combination — not auto-generated filler.
Contact Cotswold Maintenance Group today for a free, no-obligation quote. We'll get back to you within 24 hours.
We quote in writing, line by line. You'll see exactly what's included for Sheepscombe (GL5, GL6, GL10) before you commit to anything.
If you're weighing up wet room in the GL5 postcode area, the short version is: we cover Sheepscombe from a base reachable in minutes via A46, we quote in writing, and we don't subcontract the trades. Send the postcode and we'll handle the rest.