Fully tanked wet rooms for Northway homes. We check the floor build-up, set the falls to the drain, waterproof the whole area and tile it, so you get a level access shower that stays dry underneath.
Without the containment of a shower enclosure, moisture spreads further in a wet room. Northway bathrooms need adequate extraction, typically a 100mm fan on a humidity sensor, vented externally.
Wet rooms need a sloped floor to the drain. In Northway timber-floor properties, this means installing a gradient former on top of the joists, it's specialist work, not a general tiling job.
Don't let these problems get worse. Get your free quote today.
✓
Free Quotes
✓
Fully Insured
✓
Clean & Tidy
✓
Workmanship Guarantee
Wet rooms in Northway are increasingly specified as the primary bathroom, not just a luxury addition. Families appreciate the easy cleaning, elderly residents value the level access, and everyone enjoys the open, spacious feeling. We design wet rooms that serve as the main household bathroom, practical and beautiful enough for daily use by everyone.
The drainage system in a Gloucestershire wet room needs to handle peak shower flow without any standing water. In Northway installations, we use high-capacity linear drains rated at 40+ litres per minute, set flush with the finished tile surface. The drain position determines the floor gradient direction, we plan this first, before any other design decisions.
A residential area north of Tewkesbury, Northway's family homes regularly require bathroom modernisation and plumbing maintenance from trusted local professionals.
Northway is a modern Tewkesbury suburb with 1960s-70s family homes and more recent infill developments.
Northway's estate housing often has standard-sized bathrooms that can be significantly improved with modern space-efficient fixtures and better layouts.
the Severn Vale gets damp winters with heavy rainfall. Bathrooms need good ventilation and proper waterproofing, condensation on cold stone walls is a particular issue in older properties. water is moderately hard in most of Gloucestershire (150-250 mg/l calcium carbonate). Limescale builds up on shower heads, taps, wastes and glass, thermostatic valves and easy-clean coated shower glass help manage this.
Wet room construction in Gloucestershire timber-framed properties requires specific floor treatment. In Northway homes with joisted floors, we install marine-grade plywood over the joists, then pre-formed gradient boards to create the drainage fall. This structural approach prevents the flexing that cracks membrane joints and causes leaks.
The entire floor and lower walls of a Northway wet room receive tanking membrane, typically a two-coat liquid system with reinforcement tape at all junctions. We apply this to manufacturer specifications and document the process, because if there's ever a warranty issue, proper application records matter.
Anti-slip tiles in Gloucestershire wet rooms should be tested to at least R10 rating. In Northway, we recommend R11 for elderly residents or families with young children, it provides noticeably more grip on a fully wet floor.
If your Northway wet room is above another room, insist on a secondary membrane beneath the structural floor as well as the primary tanking on top. Belt-and-braces waterproofing is the only sensible approach when there's a living space below.
Regular squeegee use after showering extends the life of your Gloucestershire wet room and prevents soap scum buildup on tiles. We provide a stainless steel squeegee with every Northway wet room installation, it takes 30 seconds and makes a real difference.
Wet Room Installation jobs in Northway are scheduled around the realities below, postcode coverage, nearest roads, councils involved, and the named places we travel to from there.
Tewkesbury Borough Council, covering GL20 postcode district.
We reach Northway via M5 J9, A38, A438, and serve sites within roughly 18 miles of here.
Tewkesbury Business Park · Northway Trading Estate
Tewkesbury's flood plain means ground-floor work needs flexible scheduling around river-level alerts in winter.
A small sample of Gloucestershire work. Every job here was managed by the same team that would handle your Northway project.



Starting a wet room installation project in Northway begins with a conversation. We want to understand your priorities, whether that's staying within a specific budget, achieving a particular look, improving accessibility, or simply replacing something that's failing. From there, we visit your Gloucestershire property, assess the practicalities, and produce a detailed, itemised quote.
During the wet room installation work in Northway, you can expect our team on-site from approximately 8:30am to 4:30pm. We clean up each day, remove waste regularly, and keep noise to sociable hours. If we need to turn off your water, we'll warn you in advance and keep the interruption as short as possible.
Not considering door swing and access. In compact Gloucestershire bathrooms, a shower enclosure door that clashes with the bathroom door or toilet is more common than you'd think in Northway installations.
Using silicone where grout should be, or grout where silicone should be. In Gloucestershire bathrooms, movement joints (where walls meet floors, or where different materials meet) need flexible silicone, not rigid grout.
Using standard plasterboard in wet zones. In Gloucestershire shower installations, moisture-resistant board (green or blue board) or tile backer board must be used. Standard plasterboard in a Northway shower area will sag and fail.
Northway residents trust us for wet room installation because we deliver consistently high standards on every project, regardless of size. Quality control on every Gloucestershire project includes a detailed snag check before handover. In Northway, we don't consider a job finished until you've inspected the work and confirmed you're satisfied. Our wet room installation installations in Northway are built to last 15-20 years, which means using the right fixings, adhesives, and sealants for each specific application, not the cheapest option. Northway homeowners looking for reliable wet room installation can call us for a no-pressure conversation about their project, we're happy to advise even if you're not ready to commit.
Northway homeowners choose us for wet room installation because we combine technical expertise with genuine local knowledge of Gloucestershire properties. We protect your Northway home throughout the project with dust sheets, shoe covers, and daily cleanup, because living through building work is disruptive enough without a mess. We invest in professional tools and training for wet room installation across Gloucestershire. In Northway, this means laser levels for tile alignment, diamond wet cutters for precision cuts, and calibrated testing equipment for plumbing systems. We take on a limited number of wet room installation projects at any time across Gloucestershire, ensuring every Northway client gets our full attention rather than being one of dozens of simultaneous jobs.
When you hire a local specialist for wet room installation in Northway, after-care is straightforward. If something needs attention six months after completion, we're 20 minutes away, not at a head office 200 miles away trying to schedule a visit. Gloucestershire homeowners get responsive, personal service that continues long after the invoice is paid.
Check floor structure, joist direction, and capacity for wet room conversion.
Install a precisely sloped former and linear or point drain in the floor.
Apply liquid or sheet membrane waterproofing to the entire floor and wet area walls.
Anti-slip floor tiles, wall tiles, glass screen, and shower fixtures installed.
To discuss your wet room installation project in Northway, call us on 07927 593585 or request a free quote.
A solid concrete floor is usually the easier of the two, because a former can often be bonded straight onto it and there is no deflection to allow for. Timber floors work fine as well, they just need the joists checking, noggins where needed and a recessed former so the finished floor stays level with the doorway.
Yes, but the floor needs reinforcing and a proper gradient former. We do this regularly in Northway period properties. The key is getting the substrate right before any tiling.
Typically £1,500-£2,500 more than a standard shower installation in Northway, mainly due to the tanking and gradient work. But you save on the cost of a shower tray and enclosure.
Tell us about your project and we'll get back to you within 24 hours.
We also offer these services in Northway and surrounding areas.
We also provide wet room installation in these nearby areas:
Hand-written background reading and pricing for this exact combination, not auto-generated filler.
Wet Room Installation cost in Northway
Itemised pricing, typical £9,200 (£5,500-£17,000 range).
Wet Room vs Walk-In Shower: Which Costs More?
A direct cost and practicality comparison of wet rooms versus walk-in showers, including hidden costs people miss.
Wet Room Tanking Explained: What You Are Actually Paying For
What tanking is, which systems are used, where wet rooms fail, and how to check the waterproofing was done properly before the tiles go on.
Wet Room Installation Guide: What It Is, Who It Suits and What's Involved
A complete guide to wet room installation in Gloucestershire, covering what a wet room actually is, who it suits, and every stage of a proper build.
Contact Cotswold Maintenance Group today for a free, no-obligation quote. We'll get back to you within 24 hours.
5.0 stars across 34 reviews. Local team. Fully insured. Workmanship guarantee. We're 20 minutes from Northway, so we're not booking and dropping.
Bottom line for GL20 (Gloucestershire): wet room installation done by a local team that you can actually phone back. Same person quotes, fits, and handles snags. Quote in writing inside 24 hours.