Boiler won't fire in Selsley? Here's what to do.
A boiler that won't fire usually shows a fault code or a flashing light. The fix depends entirely on the code — and most can be diagnosed before a callout.
Try this first
Safe steps you can take in the next 10 minutes — in order.
- 1Note the fault code if displayed — it's the single most useful piece of information.
- 2Check pressure and repressurise to 1.2 bar if low.
- 3Defrost the condensate pipe outside if frozen.
- 4Reset the boiler ONCE (twice maximum). Do not keep resetting.
When to stop and call
Any fault code starting with E, F, or specific numbers your manufacturer says require an engineer. Always when there's a smell of gas — call National Gas first on 0800 111 999.
Likely causes
Most cases of a boiler that won't fire in Selsley homes come down to one of these.
- Low system pressure (most common)
- Frozen condensate pipe in cold weather
- Ignition failure — needs a Gas Safe engineer
- Failed flame sensor
- PCB fault — needs replacement
What it costs to fix in Selsley
Quick fix
£110
Typical
£260
Worst case
£700
Pressure or condensate fix: £90–£140. Diverter or expansion vessel: £180–£320. PCB or heat exchanger: £400+.
The service that fixes this
Gas Safe registered boiler installation and replacement — energy-efficient systems from Worcester Bosch, Vaillant, and Ideal with manufacturer warranties.
See boiler installation in Selsley →Quick questions
Can I fix a boiler that won't fire in my Selsley home myself?
Sometimes yes — the steps above cover the common DIY fixes. Any fault code starting with E, F, or specific numbers your manufacturer says require an engineer. Always when there's a smell of gas — call National Gas first on 0800 111 999.
What does fixing a boiler that won't fire typically cost in Selsley?
Around £260 for the typical repair (range £110–£700). Pressure or condensate fix: £90–£140. Diverter or expansion vessel: £180–£320. PCB or heat exchanger: £400+.
How quickly can someone come out in Selsley?
For genuine emergencies in Selsley we usually attend within 1–3 hours during weekdays. For non-urgent jobs we typically book within 2–5 working days.
Is this an emergency?
Usually no. A boiler that won't fire can normally wait until the next working day, which keeps the cost down. Genuine emergencies are flooding, no water at all, or gas smells.
Related problems
Boiler won't fire in nearby areas
Need someone out today?
We cover Selsley and the wider Gloucestershire area for fast plumbing and bathroom repairs.
Call 07927 593 585Recent work nearby
Nothing AI-rendered, nothing stock — these are jobs we've delivered in and around Gloucestershire.
Need someone reliable in Selsley?
5.0 stars across 34 reviews. Local team. Fully insured. Workmanship guarantee. We're 20 minutes from Selsley, so we're not booking and dropping.
In short
If you're weighing up boiler installation in the GL5 postcode area, the short version is: we cover Selsley from a base reachable in minutes via A46, we quote in writing, and we don't subcontract the trades. Send the postcode and we'll handle the rest.
Local coverage details
Boiler Installation jobs in Selsley are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.
Stroud District Council — covering GL5, GL6, GL10 postcode districts.
We reach Selsley via A46, A419, M5 J13 — and serve sites within roughly 15 miles of here.
- Stroud~2 mi
- Gloucester~10 mi
- Stonehouse~3 mi
- Nailsworth~4 mi
- Dursley~9 mi
Stonehouse Industrial Estate · Bath Road Trading Estate
Selsley is a Stroud neighbourhood — stroud's five valleys means steep, narrow lanes — for hillside properties we sometimes need to barrow materials from the nearest turning point.