Individual fixture installation and replacement — toilets, basins, vanity units, taps, cabinets, and accessories fitted properly. Serving Cam and surrounding areas.
We see a lot of DIY fixture installs in Cam — wall-hung basins pulling away from walls, toilets that rock, and vanities with unconnected overflows. Proper fitting matters.
A cracked basin, a toilet that doesn't flush properly, or a vanity unit with water damage — sometimes you don't need a whole new bathroom in your Cam home, just one fixture sorted.
Don't let these problems get worse. Get your free quote today.
✓
Free Quotes
✓
Fully Insured
✓
Clean & Tidy
✓
Workmanship Guarantee
Individual fixture replacement is one of the most common jobs we do across Gloucestershire. In Cam homes, we swap toilets, fit wall-hung basins, install vanity units, and replace taps on a daily basis. If you've bought the fixture yourself, we'll fit it. If you need advice on what to buy, we'll help with that too.
Upgrading bathroom fixtures in Cam is the fastest way to refresh your bathroom without the disruption of a full renovation. A new basin and taps can transform the look of the room in a few hours. A new toilet with a soft-close seat and concealed cistern modernises instantly. We fit everything to a professional standard.
Adjoining Dursley, Cam's expanding residential areas include new estates and established homes where bathroom renovations are a popular investment.
Cam has expanded from a small village with modern estates alongside the original stone-built village centre near the River Cam.
Low-lying Cam properties near the river can experience high groundwater levels that affect ground-floor bathroom damp-proofing requirements.
the Severn Vale gets damp winters with heavy rainfall. Bathrooms need good ventilation and proper waterproofing — condensation on cold stone walls is a particular issue in older properties. water is moderately hard in most of Gloucestershire (150-250 mg/l calcium carbonate). Limescale builds up on shower heads, taps, and heating elements — thermostatic valves and easy-clean coated shower glass help manage this.
Fixture compatibility in Gloucestershire homes needs checking before purchase. Basin tap hole spacing, toilet pan outlet type (P-trap vs S-trap), and cistern connection size all vary between manufacturers. We can advise Cam homeowners on what's compatible with their existing plumbing before they buy.
Wall-hung toilets in Cam homes require a concealed cistern frame mounted inside the stud wall. This frame carries the full weight of the fixture and user (typically rated to 400kg), so it must be properly anchored to the floor — not just screwed to the plasterboard. Professional installation is essential.
When replacing a toilet in a Gloucestershire property, measure from the wall to the centre of the waste pipe. Standard Cam installations are either 200mm (for S-trap) or variable (for P-trap). The new toilet needs to match or be adapted.
Before buying a replacement basin for your Cam bathroom, check the tap hole configuration — single tap hole, two tap holes, or three tap holes. Buying a basin with the wrong tap holes means your existing taps won't fit.
If you're fitting a wall-hung basin yourself in your Cam home, check whether the wall is stud or solid before buying fixings. Stud walls need toggle bolts or a mounting board behind the plasterboard — standard wall plugs will pull out under the basin's weight.
Bathroom Fixtures & Fittings jobs in Cam are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.
Stroud District Council — covering GL11 postcode district.
We reach Cam via A38, M5 J14 — and serve sites within roughly 14 miles of here.
Draycott Business Park · Castle Street trading area
Cam is a Dursley neighbourhood — dursley sits beneath stinchcombe hill — hillside lanes mean we plan deliveries for off-peak so as not to block residents.
Examples of recent work delivered close to Cam. We choose projects from the nearest postcode area first so you can see what's been built locally.



Starting a bathroom fixtures & fittings project in Cam begins with a conversation. We want to understand your priorities — whether that's staying within a specific budget, achieving a particular look, improving accessibility, or simply replacing something that's failing. From there, we visit your Gloucestershire property, assess the practicalities, and produce a detailed, itemised quote.
During the bathroom fixtures & fittings work in Cam, you can expect our team on-site from approximately 8:30am to 4:30pm. We clean up each day, remove waste regularly, and keep noise to sociable hours. If we need to turn off your water, we'll warn you in advance and keep the interruption as short as possible.
Hiring the cheapest quote without checking what's included. The cheapest Gloucestershire bathroom quote often excludes preparation work, waste disposal, and finishing that add up to a nasty surprise.
Skipping the tanking membrane in wet areas. In Cam properties, moisture behind tiles causes more damage than you'd expect — and it's invisible until the ceiling below starts staining.
Tiling directly onto old plaster without proper preparation. In Cam properties, old lime plaster crumbles under tile weight. Removing loose plaster and boarding the wall first prevents expensive failures.
We've completed bathroom fixtures & fittings projects in Cam ranging from straightforward replacements to complex multi-room transformations. In Cam, we've learned that thorough preparation accounts for 40% of a successful bathroom fixtures & fittings project — it's the work you don't see that determines how long the result lasts. We test every connection, seal, and fitting before completing any bathroom fixtures & fittings in Cam — water pressure testing, leak checks, and drainage flow tests are non-negotiable parts of our process. Cam homeowners looking for reliable bathroom fixtures & fittings can call us for a no-pressure conversation about their project — we're happy to advise even if you're not ready to commit.
What makes bathroom fixtures & fittings in Cam different from other areas of Gloucestershire is the unique mix of property ages and construction methods we encounter. We coordinate all trades internally for bathroom fixtures & fittings across Gloucestershire, so Cam homeowners deal with one point of contact instead of managing multiple contractors. We photograph key stages of every Gloucestershire installation — waterproofing, pipe routes, electrical connections — so Cam homeowners have a permanent record of what's behind their walls should future work be needed. We take on a limited number of bathroom fixtures & fittings projects at any time across Gloucestershire, ensuring every Cam client gets our full attention rather than being one of dozens of simultaneous jobs.
The cost of bathroom fixtures & fittings in Cam depends on several factors: the room size, the extent of plumbing changes needed, the quality of materials chosen, and whether the project involves structural alterations. A straightforward like-for-like replacement costs significantly less than a full reconfiguration with new pipe routes and wall removal.
We check your existing plumbing, wall structure, and connections to confirm the new fixture will fit.
Old fixture removed, new one installed, connected, sealed, and tested.
Silicone sealing, waste connections tested, and any minor making good around the fixture.
To discuss your bathroom fixtures & fittings project in Cam, call us on 07927 593585 or request a free quote.
Usually yes. We replace individual toilets, basins, and taps in Cam bathrooms without touching the tiling or other fixtures. If tiles need disturbing, we'll tell you upfront.
Yes — we fit customer-supplied fixtures in Cam all the time. Just check with us before buying to make sure the dimensions and connections will work.
Wall-hung fixtures need a strong frame behind the plasterboard. We install concealed cistern frames and basin brackets properly, rated for the weight. In older Cam homes, we check the wall structure first.
Tell us about your project and we'll get back to you within 24 hours.
We also offer these services in Cam and surrounding areas.
We also provide bathroom fixtures & fittings in these nearby areas:
Contact Cotswold Maintenance Group today for a free, no-obligation quote. We'll get back to you within 24 hours.
Tell us the postcode (near A38) and we'll come round, scope the job, and follow up with a fixed-price written quote inside 24 hours.
We don't try to be everything to everyone. Bathroom Fixtures & Fittings within 14 miles of Dursley is our patch, and we know it well enough to spot most quirks before stripping out. That's why our quotes stick.