Professional bath supply and installation — freestanding, built-in, corner, and roll-top baths fitted to the highest standard. Serving Highnam and surrounding areas.
Freestanding baths in Highnam homes need waste and water connections run across the floor. Poor planning leads to exposed pipes or a bath that can't sit where you want it.
A cast-iron roll-top bath filled with water can weigh over 350kg. In older Highnam properties, the floor joists may need reinforcing before installation — this must be checked first.
Don't let these problems get worse. Get your free quote today.
✓
Free Quotes
✓
Fully Insured
✓
Clean & Tidy
✓
Workmanship Guarantee
The preparation beneath a bath is just as important as the bath itself. In Highnam properties, we reinforce the floor beneath heavy baths, set adjustable legs precisely level, and ensure the waste trap is accessible for future maintenance. A properly prepared bath doesn't creak, rock, or develop slow drains — it just works, quietly and reliably.
Freestanding bath installations in Gloucestershire require concealed pipework for the best visual result. In Highnam homes, we route the hot and cold feeds through the floor directly beneath the taps, with isolation valves accessible from below. The result is a bath with no visible pipes — clean, minimal, and exactly as a freestanding bath should look.
A village just west of Gloucester, Highnam's mix of Victorian properties and modern estates presents varied bathroom installation challenges.
Highnam has a Victorian core near the church with extensive 1980s and 1990s housing development to the south.
Some older Highnam properties near the River Leadon have high water tables affecting ground-floor bathroom drainage.
the Severn Vale gets damp winters with heavy rainfall. Bathrooms need good ventilation and proper waterproofing — condensation on cold stone walls is a particular issue in older properties. water is moderately hard in most of Gloucestershire (150-250 mg/l calcium carbonate). Limescale builds up on shower heads, taps, and heating elements — thermostatic valves and easy-clean coated shower glass help manage this.
The weight of a filled bath is a genuine structural consideration in Gloucestershire properties. A standard acrylic bath holds 200 litres (200kg) plus the bather. A freestanding cast-iron roll-top holds more and weighs 80-100kg empty. In first-floor Highnam bathrooms, we check the joists can handle the load before fitting.
Bath waste connections in Highnam properties need correct fall to drain efficiently. A waste pipe that's too flat will drain slowly and trap debris. Too steep and it loses its water seal. We set the waste at the correct gradient and use easy-access traps that can be cleared if they ever block.
Cast-iron baths retain heat much longer than acrylic (water stays warm for 45+ minutes vs 15-20 minutes). If long soaks are your priority in your Gloucestershire home, the extra cost and weight of cast iron is justified.
If you're choosing a freestanding bath for your Highnam bathroom, measure the doorways and staircase before ordering — some baths won't fit through a standard 762mm door frame without removing the door or door frame.
Check your Highnam hot water capacity before ordering an extra-large bath. A 200-litre bath needs a system that can deliver that volume at temperature. If you have a combi boiler, filling time for a large bath can be 15-20 minutes.
Bath Installation jobs in Highnam are scheduled around the realities below — postcode coverage, nearest roads, councils involved, and the named places we travel to from there.
Gloucester City Council — covering GL1, GL2, GL3, GL4 postcode districts.
We reach Highnam via M5 J11, M5 J11a, M5 J12 — and serve sites within roughly 20 miles of here.
Gloucester Quays · Gloucester Business Park (Brockworth) · Waterwells Business Park · Quedgeley West Business Park
Highnam is a Gloucester neighbourhood — gloucester city centre has restricted-access streets — we plan deliveries around the one-way system and use trade parking off westgate.
A small sample of Gloucestershire work. Every job here was managed by the same team that would handle your Highnam project.



From first phone call to project completion, our bath installation service in Highnam is built on transparency. Gloucestershire homeowners receive a detailed scope of work, material specifications, a day-by-day timeline, and clear payment terms — all agreed before we lift a tool. This approach prevents the misunderstandings that plague too many building projects.
Communication during bath installation in Highnam is proactive, not reactive. You'll receive updates at the end of each working day and a brief overview of the next day's plan. If we encounter anything unexpected — and in older properties, we often do — you'll know about it immediately, along with our recommended solution and any cost implications.
Choosing fixtures before measuring the room properly. We've seen Highnam homeowners buy a freestanding bath that doesn't fit through the door, or a vanity unit that blocks the radiator.
Not checking water pressure before choosing a shower system. In Highnam, the wrong shower type on the wrong water system is the most common cause of disappointing performance.
Using standard cement grout in shower areas. In Gloucestershire's damp climate, cement grout in a Highnam shower will discolour within 12-18 months. Epoxy grout costs more but lasts indefinitely.
Highnam residents trust us for bath installation because we deliver consistently high standards on every project, regardless of size. In Highnam, we've learned that thorough preparation accounts for 40% of a successful bath installation project — it's the work you don't see that determines how long the result lasts. We test every connection, seal, and fitting before completing any bath installation in Highnam — water pressure testing, leak checks, and drainage flow tests are non-negotiable parts of our process. Ready to discuss your bath installation project in Highnam? We offer free, no-obligation home visits where we assess the space, discuss your ideas, and provide a clear written quote.
Highnam homeowners choose us for bath installation because we combine technical expertise with genuine local knowledge of Gloucestershire properties. We coordinate all trades internally for bath installation across Gloucestershire, so Highnam homeowners deal with one point of contact instead of managing multiple contractors. We photograph key stages of every Gloucestershire installation — waterproofing, pipe routes, electrical connections — so Highnam homeowners have a permanent record of what's behind their walls should future work be needed. Highnam is one of our core service areas across Gloucestershire. We know the local suppliers, understand the building styles, and have the experience to deliver bath installation that genuinely lasts.
We understand the planning context in Gloucestershire that affects bath installation in Highnam. Conservation areas, listed building restrictions, building control requirements — these vary locally and affect what's permissible. Our experience navigating these regulations saves Highnam homeowners time and prevents costly mistakes.
Measure the space, check floor structure, and recommend the right bath size and type.
Reinforce floor if needed, run waste and water supplies to the bath position.
Bath fitted, levelled, sealed (or freestanding connections made), and fully tested.
Bath panel fitted (if applicable), waste sealed, overflow tested, and area cleaned up.
To discuss your bath installation project in Highnam, call us on 07927 593585 or request a free quote.
We always check floor strength in Highnam properties before fitting a heavy bath. If reinforcement is needed, we'll explain what's involved and quote for it upfront.
Acrylic is lighter, warmer to touch, and cheaper. Steel is more durable and holds heat better (especially with insulation). For most Highnam homes, acrylic is the practical choice.
Yes — an over-bath shower with a bath screen is a great space-saver. We fit thermostatic mixer kits with proper waterproofing to the wall.
Tell us about your project and we'll get back to you within 24 hours.
We also offer these services in Highnam and surrounding areas.
We also provide bath installation in these nearby areas:
Contact Cotswold Maintenance Group today for a free, no-obligation quote. We'll get back to you within 24 hours.
Five-minute call, honest opinion on what's involved, no pressure. If it's not the right fit we'll tell you.
Final thought: a bath installation is a 1–3 week project that lives with you for a decade. Choose the team that takes the visit seriously, asks the awkward questions, and writes the price down. We do all three across GL1.